Audio-Technica AT2050 - Multi-Pattern Condenser Microphone

Audio-Technica AT2050 - Multi-Pattern Condenser Microphone

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

Features:

• Three switchable polar patterns: omni, cardioid, figure-of-eight
• Switchable 80 Hz high-pass filter and 10 dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
• Includes shock mount & protective pouch

Specs:

• Element: Externally-polarized (DC bias) condenser
• Polar Patterns: Cardioid, Omnidirectional, Figure-of-eight
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-off – 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 120 ohms
• Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 sB SPL, with 10 dB pad (nominal)
• Noise: 17 dB
• Dynamic Range (typical): 132 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-42V DC, 4.7 mA typical
• Switches: Polar selection; Flat, Roll-off; 10 dB pad (nominal)
• Weight (Microphone): 14.5 oz (412 g)
• Dimensions (Microphone): 6.69" (170.0 mm) long, 2.05" (52.0 mm) maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Furnished: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
• Audio-Technica Case Style: R5