Audio-Technica AT4050 - Multi-Pattern Condenser Microphone

SKU:
AT4050
$699.00
$895.00
(You save $196.00 )
Current Stock:

Audio-Technica AT4050 - Multi-Pattern Condenser Microphone

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. 

Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.

Features:

  • Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Three switchable polar patterns: omni, cardioid, figure-of-eight
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Custom shock mount provides superior isolation

Specs:

  • Element: Externally-polarized (DC bias) condenser
  • Polar Patterns: Cardioid, Omnidirectional, Figure-of-eight
  • Frequency Response: 20-18,000 Hz
  • Low Frequency Roll-off – 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -36 dB (15.8 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 sB SPL, with 10 dB pad (nominal)
  • Noise: 17 dB
  • Dynamic Range (typical): 132 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 4.2 mA typical
  • Switches: Polar selection; Flat, Roll-off; 10 dB pad (nominal)
  • Weight (Microphone): 18.0 oz (510 g)
  • Dimensions (Microphone): 7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories Furnished: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
  • Audio-Technica Case Style: R1