RCF NX-945A - Professional Active 15" 2-Way Speaker with 4" HF Driver

RCF
SKU:
NX-945A
$2,299.00
$3,349.00
(You save $1,050.00 )
Current Stock:

RCF NX-945A - Professional Active 15" 2-Way Speaker with 4" HF Driver

Designed to deliver stellar audio performance and versatility for intensive audio applications, the white RCF NX 945-A is a highly flexible, easy-to-use, 2100W powered PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor.

The highly efficient 2100W Class-D bi-amplifier delivers 1400W peak to the 15" woofer and 700W peak to the 1.4" neodymium compression driver, which together provide full-range audio (45 Hz to 20 kHz) with a sound-pressure level powerful enough to ensure the entire audience can hear your performance. The NX 945-A utilizes RCF's proprietary FiRPHASE and Bass Motion Control DSP processing to deliver absolute clarity and deep, powerful bass response. The rugged, tour-ready all-wood cabinet is easy to carry and installs securely on pole-, flown-, wall-, or truss-mounts using dedicated rigging points.

 

  • 135 dB Max SPL Output
  • 45 Hz to 20 kHz Frequency Response
  • 4" Titanium/Neodymium Compression Driver
  • 15" Neodymium Woofer
  • FiRPHASE Filters for Coherent Sound
  • Bass Motion Control Low-Freq Management
  • True Resistive Waveguide Technology
  • Combination XLR-1/4" Input + XLR Output
  • Advanced DSP with 3 Presets
  • Configurations for Floor, Stage, Flown

Key Specs

Speaker Type
Active Loudspeaker/Stage Monitor
Configuration
2-Way
Total Output Power
2100 W Peak
LF Driver
1x 15" / 38 cm Woofer
Voice Coil: 3.5" / 88.9 mm
Magnet: Neodymium
HF Driver
1x 1.4" / 35.6 mm Polyimide Compression Driver
Voice Coil: 4" / 101.6 mm
Magnet: Neodymium
Frequency Range/Response
Speaker Type
Active Loudspeaker/Stage Monitor
Configuration
2-Way
Enclosure Type
Bass-Reflex
Total Output Power
2100 W Peak
Amplifier Power Rating
Low Frequency (LF)
1400 W Peak
Mid Frequency (MF)
700 W Peak
Drivers
LF Driver
1x 15" / 38 cm Woofer
Voice Coil: 3.5" / 88.9 mm
Magnet: Neodymium
HF Driver
1x 1.4" / 35.6 mm Polyimide Compression Driver
Voice Coil: 4" / 101.6 mm
Magnet: Neodymium
Performance
Frequency Range/Response
45 Hz to 20 kHz
Maximum SPL
135 dB (Peak)
Coverage Angle
100° H x 70° V
Protections
RMS, Signal Limiter, Thermal
Signal Processing
Crossover Frequency
650 Hz
EQ & Filters
No
Dynamic Processing
Soft Limiter
Alignment Delay
No
Digital Signal Processing
FIR Filter, Venue Settings
Connectivity
Audio I/O
1x Combo XLR-1/4" TRS Input
1x XLR 3-Pin Thru/Output
Network I/O
No
USB I/O
No
Wireless
No
Mobile App Compatible
No
Power
AC Input Power
100 to 120 VAC, 60 Hz
AC Power I/O
1x powerCON Input
Power Consumption
300 W
Physical
Color
White
Mounting
Stand Mount
1 x Pole Socket - Unspecified Size (Bottom)
Suspension Points
2 x M10 Fly Point (Top)
1 x M10 Fly Point (Each Side)
1 x M10 Fly Point (Rear)
Handles
1x Each Side
Construction Material
Plywood, Stainless Steel Grille
Environmental Resistance
No
Dimensions
27.8 x 17.7 x 16.5" / 70.6 x 45 x 41.9 cm
Weight
60.2 lb / 27.3 kg

Power that moves

  • The most powerful amplifier in its class. RCF's improvements in transducer design make them strong and powerful, so the amplifier follows the evolution. With 2100W power, the 2-channel NX 945-A Class-D amplifier is 50% more powerful than previous models, able to manage extreme sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss.
  • The NX 945-A is energy-efficient, so there's no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet—with no moving parts. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NX 9 series amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.

Legendary Transducers

Potent woofer

  • The low-frequency transducer is a high-power 15" woofer with a 3.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.

Superior compression drivers

  • The ND840 Compression Driver in pure Titanium with a 4" voice coil allows a crossover point at only 650 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.

Direct Drive Technology

  • The voice coil features a high-temperature Kapton former. The assembly process takes advantage of RCF proprietary Direct Drive technology. The diaphragm’s suspension has been designed following extensive research and development aimed at minimizing distortion and extending low-frequency range.

Bass Motion Control

  • When searching for extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
  • NX 9 Series with BMC can handle the lowest audible frequencies without affecting the woofer stability, providing extended linearity and better sound integrity.
  • The BMC method works by creating a complete map of the dynamic behavior of the woofer to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the BMC algorithm breaks this rule.
  • In combination with FiRPHASE technology, NX 9 has a new level of audio performance in this series of speakers.
FiRPHASE
 

RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener.The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

Tour-Proven Workhorse
 
NX 9 can operate as either the main system or as a floor monitor. This flexibility makes it a smart choice for a wide range of live sound applications. The rugged all-wood cabinet is easy to carry with handles on both sides. The lower side includes a steel pole socket for mounting on a stand or a subwoofer pole. Each model can also be flown, wall- or truss-mounted using the six included M10 rigging points, Quick Lock pins, and special accessories. From the wood cabinet to the final texture and protective grille, NX 9 Series offers maximum strength for intensive use on the road and can be used for fixed installation.
 
Ready for Heavy-Duty Applications
 
The highly innovative entertainment industry is always evolving by increasing demands on interconnection systems. Particular environmentally sealed connectors are highly requested for heavy-duty and harsh environment applications of entertainment equipment. The speaker features True Outdoor Protection (TOP) PowerCON TRUE1 power input connectors. These ruggedized sealed connectors feature IP protection and UV resistance approved according to UL50E.